tube-type mixing extractor

The tubular mixed extraction unit is independently developed by our company and has been first applied and promoted domestically. It has the advantages of enhancing the efficiency of mixed extraction, reducing the gas volatilization in the mixing chamber and the installed power, minimizing the vibration and noise during operation, and lowering the investment and operation costs.It has a service life of over 10 years under harsh conditions and low maintenance costs.

  • The stage efficiency is more than 10% higher than that of the traditional mixer;
  • The pumping volume and mixing intensity can be flexibly adjusted according to the needs of clarification ability; Nickel Leaching process Design
  • Compared with the conventional extraction mixing tank, the volume of the extractor is reduced to less than 3% of the conventional mixing tank, and the mixing time is shortened from 5 minutes to 6-7 seconds, completing the fine mixing flash extraction;
  • The internal structure of the equipment is exquisite, and the low-speed relative movement of the micro-mixing device makes the oil and water form a very thin layer of liquid film arranged in an orderly interval to achieve complete mixing and flash contact extraction;
  • There is no emulsification during operation, and the consumption of extractant is small.
Cita ora






    LinkedIn
    Instagram
    YouTube

    tube-type mixing extractor

    Less Invesment

    Reduce the height and floor space of the workshop. The extractor is small, occupying an area of ​​less than 10, and the height of the transmission device is less than 2m;

    The area is reduced, which can increase the production capacity of extraction equipment per unit area, and correspondingly reduce the project investment;

    There is no conventional large-scale mixing tank, the extractant and metal aqueous solution for single-stage filling are reduced by 20%, the capital occupied by single-stage filling is correspondingly reduced by 20%, and the total investment is significantly reduced.

    Low Operating Cost

    Low installed power and low power cost of extraction operation. The installed capacity and operating power of the extraction system with the same capacity are reduced to less than 50% of the conventional extraction mixing tank;

    Low investment and operation cost of extraction system. It is also suitable for the transformation and application of the old extraction system;

    There are no wear parts in the mixer, and the noise is low. It can run stably for a long time after debugging;

    The equipment is reusable, easy to move, move, transport and install to new projects, and has high residual value of equipment assets;

    Modular design, simple structure, flexibility to adapt to the extraction system capacity.

    Good Environmental Protection Effect

    The mixer is closed. There is no leakage of acid mist and oil mist, and the site environment is good. Prevent oxidation and volatilization of organic phase. There is no burning space and the fire safety is improved;

    Save the investment of oil mist and acid mist absorption system and the cost of waste gas treatment;

    There is no volatilization of oil mist in the mixer, which reduces the consumption of extractant and solvent oil;

    All the materials used are environment-friendly and can be recycled completely, which is environmentally friendly.

    Convenient Operation

    TWhen parking, the oil and water in the mixing chamber will not flow back into the oil tank and water phase tank, resulting in the mutual inclusion and entrainment of oil and water;

    In the process of production and operation, with the size of liquid feeding, the liquid pumping volume and liquid level of extraction system can be automatically and dynamically balanced;

    The shell and transmission parts are all CPVC. According to different media, 2205 or Hastelloy is used for the main shaft, which has excellent corrosion resistance, long service life, light weight of spare parts and easy replacement.

    New-Style Equipment VS Traditional Equipment

    TYIC offre ai clienti un migliore ritorno economico e aiuta il vostro progetto a generare maggiori profitti.

    New-Style Equipment

    Traditional Equipment

    Advantage 1

    The efficiency is over 10% higher than that of traditional mixers.

    Advantage 2

    Mix for 6-7 seconds, then complete the rapid flash extraction with fine blending.

    Advantage 3

    The process does not cause emulsification and the consumption of the extractant is low.

    Argomento 01

    It is 10% less efficient than the new equipment.

    Argomento 02

    Mixing for 5 minutes resulted in a significant decrease in efficiency.

    Argomento 03

    During operation, emulsification occurs, which leads to increased consumption and higher costs.

    Per saperne di più su di noi, consultate le informazioni sulla nostra fabbrica.

    Contattateci al più presto per ottenere preventivi in tempo reale.

    Tenetevi aggiornati sulle ultime informazioni relative a TYIC.

    Campi di applicazione

    Metal-Li

    Utilizzato per la produzione di nuovi materiali catodici per batterie (come LiCoO₂, LiFePO₄), nell'industria ceramica e del vetro.

    Metal-Co

    I metalli di alto valore vengono utilizzati nei materiali catodici (come l'ossido di litio e cobalto), nelle leghe e nei catalizzatori.

    Metallo-Ni

    Utilizzato per materiali catodici ternari (NCM/NCA), acciaio inossidabile e galvanoplastica.

    Metallo-Mn

    Utilizzato per i materiali catodici (come il manganato di litio), nell'industria siderurgica e nell'industria chimica.

    Metallo-Rb

    Viene solitamente ricavato dai minerali di litio o dalle salamoie tramite estrazione con solvente o scambio ionico.

    Metal-Ce

    Si ottiene dal minerale di pollucite mediante lisciviazione acida seguita da precipitazione o estrazione con solvente.

    Metal-Mo

    Ottenuto dalla molibdenite (MoS₂) mediante processi di calcinazione e idrometallurgici.

    Metal-V

    Ricavato da scorie contenenti vanadio, minerali o catalizzatori esausti mediante estrazione con solvente o lisciviazione alcalina.

    Metal-Sc

    Ottenuto dai residui di bauxite o dagli scarti di uranio mediante lisciviazione acida ed estrazione con solvente.

    Lastre rigide in PVC

    Eccellenti materiali plastici termoformati in grado di sostituire in parte l'acciaio inossidabile e altri materiali sintetici resistenti alla corrosione. Sono ampiamente utilizzati nei settori chimico, petrolifero, della galvanoplastica, delle apparecchiature per la depurazione e il trattamento delle acque, delle attrezzature per la tutela ambientale, minerario, medico, elettronico, delle comunicazioni e dell'arredamento.

    • Rapporto qualità-prezzo:Rispetto alla fibra di vetro, presenta una maggiore resistenza alle temperature,
      ha proprietà anti-invecchiamento, non si deforma, è facile da lavorare ed è più economico e conveniente.
    • Resistenza alla corrosione:Il PVC presenta una buona resistenza alla corrosione da parte di liquidi corrosivi quali l'acido solforico, l'acido nitrico e gli alcali forti. Per questo motivo, è ampiamente utilizzato negli impianti chimici per lo stoccaggio, le reazioni, l'estrazione, ecc.
    • Lunga durata:Il pannello rigido estruso in PVC si contraddistingue per la lunga durata e la riciclabilità.

    Bastoncino per saldatura in PVC

    Adatto alla produzione dei relativi materiali in fogli e prodotti tubolari. Utilizzato per la saldatura di varie apparecchiature chimiche e macchinari anticorrosivi in generale.

    • Specifiche tecniche: 2,0 mm, 2,5 mm, 2,8 mm, 3,2 mm.
    • Varietà: A triangolo, a doppio filo, a triplo filo, circolare.
    • Lunghezza: 1 m o su misura in base alle esigenze del cliente.
    • Colore: Grigio chiaro, bianco o personalizzato in base alle esigenze del cliente
    • Confezione: Ogni confezione contiene 5 chilogrammi.

    Il prodotto è conforme alla norma HGB2161-62 della Repubblica Popolare Cinese.

    Caso di applicazione

    Domande frequenti

    A:The tubular mixing extractor operates by driving a stirrer installed inside a shell composed of pipes through a motor. The water phase and organic phase are sucked from the bottom of the equipment into the extractor, where mixing elements divide the fluid into numerous small streams in a turbulent state. This creates intense mixing between the two phases, increasing the contact surface area, promoting molecular diffusion, and accelerating the mass transfer rate of various elements between the phases for efficient extraction reactions. The mixed phase after the extraction flows out from the upper outlet of the equipment.

    A:

    Material Resistenza alla corrosione
    CPVC shell Resistant to low-concentration sulfuric acid, hydrochloric acid, liquid alkali, salt solutions, and various extractants (except TBP)
    Hastelloy Spindle Selected for applications with fluorine, high-concentration hydrochloric acid, high-concentration sulfuric acid, or high-concentration chloride ions
    2205 Stainless Steel Spindle Selected for sulfate solutions under low-acidity conditions

    A:Parameter ranges and influences:

    Flow rate:0.1-1m/s

    Temperature:0-80°C

    Pressure:Atmospheric pressure

    Flow range:20-200m³/h

    A:Not suitable for working solutions prone to crystallization or solid residue generation.

    Richiesta di preventivo

      it_ITItaliano