Demande de devis

Conception d'un procédé de traitement des gaz résiduaires

Waste Gas Treatment Process Design

​Les organic waste gas pretreatment consists of two – stage alkali washing, one – stage water washinget surface cooling mist removal.​

  • Les alkali washing tower removes sulfuric acid mist and hydrogen chloride from the waste gas.​
  • After acidic components are removed, a water washing tower buffers to reduce the impact of entrained lye on subsequent adsorption equipment.​

Pre – treated waste gas (acid – removed, de – watered, humidity – adjusted) is pressurized by a fan and sent to an activated carbon adsorption tank under suitable conditions. Once the activated carbon is saturated after a period of adsorption, its performance declines.​

Periodic desorption of the organic waste gas from the activated carbon surface is required to restore its adsorption ability. This process uses the fact that activated carbon has high adsorption capacity at room temperature and low capacity at high temperature to recycle it, known as temprature swing adsorption in the industry.
Purified waste gas is discharged from the chimney’s high point, which has detection and online monitoring ports, along with a monitoring platform and guardrails, meeting relevant local and national standards.
TYIC is engaged in the manufacturing of acid mist absorption towers 、corresponding pipeline and relevant equipment, as well as the treatment of acid mist absorption in unorganized gases and the handling of acid-containing waste gases. (The acid mist removal rate of TYIC’s process acid mist absorption tower is 100%.)

Emission Target

In accordance with the emission standards of “Emission Standard of Pollutants for Inorganic Chemical Industry” (GB31573-2015), “Integrated Emission Standard of Air Pollutants” (GB16297-1996), and “Emission Control Standard of Volatile Organic Compounds from Industrial Enterprises” (DB12524-2014), and strictly implementing them, under the condition that the air volume reaches the design value/meets the collection requirements of the workshop, the pollutant emission concentrations after treatment should meet the following standards:

Emission Standards for Organic Pollutants

Number Pollutant Items The maximum Allowable Emission Concentration
(mg/m³)		 Height of Release(m) Maximum Allowable Emission Rate(kg/h)
1 NMHC 80 15 2.0
2 Sulfuric Fog 20 15 1.5
3 HCl 20 15 0.26

TOUT CE QUE VOUS N'AVEZ PAS PU TROUVER？

Avantages de notre entreprise

TYIC se concentre sur le marché mondial. Nous disposons des avantages suivants :

  • Cycle de paiement personnalisé
  • Faible coût
  • Équipe technique professionnelle
  • Contrôle strict de la qualité.
  • Réponse rapide ou enthousiasme.

ENVOYEZ-NOUS UN COURRIEL

info@tyic.net

 

Demande de devis

En fonction des exigences du client et des caractéristiques du produit, la planification et la conception de l'ensemble de la ligne de production de lixiviation et d'extraction sont achevées.

    fr_FRFrançais
    en_USEnglish de_DEDeutsch pt_PTPortuguês es_ESEspañol it_ITItaliano fr_FRFrançais
    Ce site web utilise des cookies pour améliorer votre expérience. Si vous continuez à utiliser ce site, vous l'acceptez.